Switch Guards

By preventing any inadvertent lever operation, protection guards avoid the end-user from activating critical functions. They can also ensure the protection of the switch below, especially when the product is positioned outdoor or in applications prone to accidental drops.


5 Series
Filters
  1. WPG series
    WPG series
    This specific metal security cover has been designed for the WP series to prevent unwanted activation especially when the product is positioned outdoors. Main featuresTwo-position coverMetal material for high impact resistanceThree types of switch guards (held up, down or both)Eight colors available for the mobile part
  2. SG 90 Series
    SG 90 Series
    Switch guards prevent any inadvertent lever operation. When the guard is raised, the lever can be operated freely. When the guard is fully depressed, the lever is reset/locked in a stable position. They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded bushing and lever length 17,5 (.688) outside bushing. Main features : Models for 2 or 3 positions switchesHoles for wiring a seal optionalNote : For correct switch operation, the switch guard should be adjusted properly by means of 2 nuts.
  3. Switch guards for 12000 - 3500 - 600H - 6000
    Switch guards for 12000 - 3500 - 600H - 6000
    Switch guards prevent any inadvertent lever operation. When the guard is raised, the lever can be operated freely. When the guard is fully depressed, the lever is reset/locked in a stable position. They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded bushing and lever length 17,5 (.688) outside bushing. Main features : Models for 2 or 3 positions switches1,5mm holes for wiring a seal optionalNote : For correct switch operation, the switch guard should be adjusted properly by means of 2 nuts.
  4. MSG
    MSG
    The MSG series is a new range of switch guards combining modern design and robustness, specially dedicated to harsh environments. They are intended for use on our 12000, 3500, 600H and 6000 toggle switches. Main features :APEM patented design Avoid inadvertent operationNo distortion or break in case of crushingResistant to hydrocarbons, acids, saline environment, high températuresMarking on requestOptional seals
  5. CSG
    CSG
    The CSG series is a new range of thermoplastic switch guards. Light, practical and modern, they feature anti-tamper wire seal hole as standard. They are intended for use on our 5000M and 600H toggle switches. Main features : Patented design, easier grip even with glovesSide protection avoiding inadvertent actuationNo distortion or break in case of crushingUltra-competitive costTypical Application

Showing 1~ 5 of 5 Series