DIP & Coded Rotary Switches

DIP and coded Rotary switches are used to generate coded outputs to your electronics.DIP (Dual In-Line Package) switches allow to define the parameters within 2-12 positions whereas with coded Rotary switches are actuated through the rotation of a central shaft that causes movement of attached contacts.


12 Series
Filters
  1. PT65
    PT65
    Miniature Through Board Rotary Code SwitchMain features4 actuator typesCompact DesignHigh reliabilitySolder and flux sealed, washable
  2. P65
    P65
    Miniature Through Board & Surface Mount Rotary Code SwitchMain featuresDesigned for higher temperature applicationsSolid PCB pinsHigh reliabilityAbrasion resistant gold-plated contacts
  3. P36
    P36
    Sub-miniature Surface Mount Rotary Code SwitchMain features3 actuator typesSmall foot printHigh reliabilitySolder & flux sealed, washable
  4. P25
    P25
    Sub-miniature Surface Mount Rotary Code Switch.Main features2.5 mm high off the PCBLateral C-contactSMJ & SMT
  5. NDS
    NDS
    The standard profile NDS DIP switch is designed for reliable operation with positive detent action. Available 1 to 12 poles, through hole mounting.Main features2 to 12 waySpray washable with tape sealSelf-cleaning wiping contactsGold plated terminals
  6. NDP
    NDP
    The standard profile NDP DIP switch is designed for reliable operation with positive detent action. Available 2 to 12 poles, through hole mounting.Main features2 to 12 waySpray washable with tape sealSelf-cleaning wiping contactsGold plated terminals
  7. NDA
    NDA
    The standard right-angle profile NDA DIP switch is designed for reliable operation with positive detent action. Available 2 to 12 poles, through hole mounting. Main features2 to 12 waySpray washable with tape sealSelf-cleaning wiping contactsGold plated terminals
  8. IKP
    IKP
    Low profile piano style - Through Hole or Surface mount.Main featuresFlush or protruding actuatorsSpray washable with tape sealSelf-cleaning wiping contactsGold plated terminals
  9. IKH
    IKH
    The very low profile IKH gull wing half pitch DIP switch is designed for reliable operation with very small PCB space requirement. Process compatible (withstand IR reflow soldering) and washable (tape seal standard). Main features 1,27 mm (.050) terminal to terminal pitchOverall height from PCB : 1,6 mm (.063) onlyVery small PCB space requirementProcess compatible - withstand IR reflow solderingWashable (tape seal standard)
  10. IKD
    IKD
    Low profile - Through Hole or Surface mount.Main featuresRaised and recessed actuatorsEven and odd pole numbersSelf-cleaning wiping contactsGold plated terminalsSpray washable with tape seal
  11. IKC
    IKC
    The very low profile IKC J-bend half pitch DIP switch is designed for reliable operation with an extremely small PCB space requirement. Process compatible (withstand IR reflow soldering) and washable (tape seal standard).Main features1,27 mm (.050) terminal to terminal pitchOverall height from PCB : 1,7 mm (.067)Very small PCB space requirementProcess compatible - withstand IR reflow solderingWashable (tape seal standard)
  12. DH1
    DH1
    Right or left Angle PCB mounting thumb wheel switch.Main featuresDiameter 13 mmWidth 16 mm SMT Gull Wing10 Position BCD

Showing 1~ 12 of 12 Series